Warning: Last items in stock!
Trap designed to monitoring tephritid diptera (fruit flies) in combination with the appropriate attractant diffuser (not included).
It is a triangular trap constituted by a water-resistant plastified white cardboard sheet with a triangular section opening of 9.5 cm on the side and a depth of 12.7 cm. It is accompanied by a wire hanger adapted to suspend the trap by using a pole to a natural or artificial support and a PET adhesive sheet, with a 2x2 cm black printed grid on one side, to be placed at the base of the trap.
The adhesive sheet consists of a 0.3 mm thick PET film, trapezoidal in shape, measuring 15.88 x 9.4 cm, yellow in color, covered with a high-density contact adhesive film (without solvents), with an adhesive concentration of 8 mg / cm2, which prevents slipping or dripping. The adhesive layer is covered with a sheet of siliconized paper. The adhesive sheet has two triangular flaps at its ends, marked with a dotted line, which must be folded down to fix the sheet to the trap, preventing its sliding.
The bottom of the trap has a control sheet printed to record its location, date of placement and revision dates.
Activation of the trap: Fold the trap along the dotted lines, insert the upper tab into the slot to fix the shape of the trap. Remove the sheet of siliconized paper that covers the adhesive sheet and place it properly in the trap. Install the wire hanger. Place the attractant diffuser and hang the trap of a natural or artificial support, in a suitable place according to the target species.
OBSERVATIONS: This product is usually sold in boxes of 400 units, but it is not mandatory to buy full boxes. It means you can buy the units that you need