ECONEX CHROMATIC HANGER Code: TA210
Hanger for chromatic traps.0,88 €
Adhesive chromatic trap consisting of a light-resistant polyethylene blue sheet of 1,000 cm2 (40 x 25 cm), with a 2x2 cm grid printed in black, on both sides.
Warning: Last items in stock!
|OMDF register number||111/2014|
Adhesive chromatic trap consisting of a light-resistant polyethylene blue sheet of 1,000 cm2 (40 x 25 cm), with a 2x2 cm grid printed in black, on both sides. The sheet is coated on both sides with a pressure-sensitive adhesive, solvent-free, which is protected by individual sheets of translucent silicone paper. A margin of 1 cm is left free of impregnation, following the longer side on both sides of the sheet, to facilitate its manipulation. It has four holes in the corners to facilitate the installation.
This trap is used mainly for the capture of thrips.
The trap is activated by removing the sheet of silicone paper covering the adhesive, and will be active 24 hours a day for 6 to 8 weeks, or until the trap is completely saturated with insects. It is usually hung from one or two of the perforated holes.
In general, the density of blue chromatic traps is 2 to 4 traps for every 1,000 m2 (for detection and monitoring) and 1 trap for each surface area of 5 to 25 m2 (for mass trapping). The traps can be active throughout the year, and must be present in the crop two or three weeks before the flight of the insect.
The trap should be stored in its original packaging in a dry place protected from direct sunlight.
OBSERVATIONS: This product is sold in boxes of 250 units, but through this virtual store you can buy the ones you need without having to buy a box.
Hanger for chromatic traps.